Replacing Kirby Vacuum Belt

Replacing Kirby Vacuum Belt

You will need to purchase a replacement Kirby vacuum belt before beginning this project. Turn off and unplug the Kirby vacuum cleaner. Remove the vacuum bag and any dirt and debris from inside the vacuum. Locate the brush roller inside the vacuum. The belt will be looped around the brush roller. Use your fingers to pull the belt off of the brush roller. Take the new belt and loop it around the brush roller, making sure it is tight. Reattach the vacuum bag and plug in the vacuum. Turn on the vacuum and test it out on some carpet.

Do all Kirby vacuums use the same belt?

Kirby vacuums are known for their high quality and durability. However, not all Kirby vacuums use the same belt. There are different Kirby models that use different belts. For example, the Kirby Sentria uses a different belt than the Kirby G5.

How long should a Kirby belt last?

To prolong the life of your Kirby belt, make sure to regularly clean the vacuum head, brushroll, and other parts of the vacuum. A build-up of dirt and debris can cause the belt to wear down prematurely. In addition, avoid vacuuming over sharp objects or on rough surfaces, as this can also damage the belt. Lastly, be sure to check the belt periodically for any cracks or fraying and replace it immediately if necessary.

See Also  Intex Vacuum For Above Ground Pool

Are Kirby vacuum belts Universal?

There is no single answer to this question as different Kirby vacuum models use different belts. However, many Kirby belts are designed to be compatible with multiple models, so it is possible to find a Kirby belt that will fit your vacuum. To be sure, you can consult your Kirby vacuum’s manual or contact a Kirby customer service representative.

How do you change a belt on a Kirby Gen 3?

  1. Unplug the Kirby vacuum cleaner from the electrical outlet.
  2. Turn the Kirby vacuum cleaner upside down on the floor.
  3. Locate the two white screws on the bottom of the Kirby vacuum cleaner.
  4. Use a Phillips head screwdriver to remove the two white screws.
  5. Lift up the bottom plate of the Kirby vacuum cleaner.
  6. Locate the belt around the brush roll.
  7. Remove the old belt from around the brush roll.
  8. Take the new belt and loop it around the brush roll.
  9. Replace the bottom plate on the Kirby vacuum cleaner.
  10. Use the Phillips head screwdriver to screw in the two white screws.
  11. Plug the Kirby vacuum cleaner into the electrical outlet.

Final Talk

If your Kirby vacuum isn’t working as well as it used to, it might be time to replace the belt. This is a relatively easy process that you can do at home, and it will help restore your vacuum to its former glory.

See Also  High Temperatur Vacuum Oven