How To Clean Bissell Vacuum

How To Clean Bissell Vacuum

  1. Unplug the vacuum from the outlet.
  2. Remove the hose from the vacuum. Most hoses have a clip or latch that needs to be released in order to remove the hose.
  3. Use a vacuum attachment or a brush to clean out the inside of the hose. If the hose is very dirty, you may need to rinse it out with water.
  4. Reattach the hose to the vacuum.
  5. Vacuum any loose dirt or debris from the outside of the vacuum.
  6. Use a damp cloth to wipe down the outside of the vacuum. Avoid getting any water inside the vacuum.
  7. Allow the vacuum to air dry completely before plugging it back in and using it.

How do I clean my Bissell upright vacuum?

  • First, check the vacuum for any blockages. Hair and debris can easily get wrapped around the brush roll, preventing the vacuum from working properly.
  • Next, empty the dustbin. Bissell vacuums have a “lift-off” dustbin, making it easy to empty without having to touch any of the dirt.
  • Then, clean the filters. Most Bissell vacuums have both a pre-motor filter and a post-motor filter. The pre-motor filter is located near the dustbin, while the post-motor filter is located near the back of the vacuum. Both filters should be washed in warm, soapy water and left to air dry.
  • Finally, clean the vacuum hose. Detach the hose from the vacuum and use a brush or a vacuum attachment to remove any debris.
See Also  Back Pack Vacuum

Can Bissell vacuum filter be washed?

Yes, you can wash a Bissell vacuum filter. You should wash the filter every month or two, or whenever it starts to look dirty. To wash the filter, remove it from the vacuum and rinse it in warm water. Then let it air dry before putting it back in the vacuum.

How do you clean the bottom of a Bissell vacuum?

  1. Unplug your vacuum from the outlet.
  2. Remove the bottom plate of the vacuum by unscrewing the screws that hold it in place.
  3. Take a look at the bottom of the vacuum and identify any areas that are particularly dirty.
  4. Use a damp cloth to wipe down the bottom of the vacuum, focusing on the dirty areas.
  5. Once you’ve wiped down the bottom of the vacuum, replace the bottom plate and screw it back into place.
  6. Plug your vacuum back in and turn it on. Run the vacuum over a clean piece of paper or cloth to check that the bottom is indeed clean.

How do you clean a Bissell vacuum tube?

  1. Start by unplugging your vacuum from the outlet.
  2. Next, locate the vacuum tube. This is usually located near the base of the vacuum.
  3. Once you have found the vacuum tube, detach it from the vacuum.
  4. Now, take the vacuum tube and place it in a sink or basin filled with warm, soapy water.
  5. Allow the vacuum tube to soak in the water for a few minutes.
  6. After a few minutes have passed, take a clean cloth and use it to scrub the inside of the vacuum tube. Be sure to get rid of any dirt or debris that may be clinging to the tube.
  7. Once you have scrubbed the inside of the tube, rinse it off with clean water.
  8. Finally, reattach the vacuum tube to the vacuum and plug it back in.
See Also  Vacuum Cyber Monday Deal


If you have a Bissell vacuum, you know how important it is to keep it clean. Not only does it help your vacuum work better, but it also helps to prolong its life. Luckily, cleaning a Bissell vacuum is relatively easy to do. In most cases, you can simply remove the vacuum’s filter and wash it with soap and water. You may also need to clean the vacuum’s brushes and other parts from time to time.